A shop foreman reading a new welder's resume wants to know three things fast: which processes you can run, what material and thickness you have welded and whether your work has passed a test or an inspection. A fresher welder resume is read for your training program or apprenticeship, the processes you have practiced (MIG, TIG, stick, flux-cored), the joints and positions you have welded, any test plates you passed and your safety habits. BLS reports a median pay of $53,750 for welders, cutters, solderers and brazers in May 2025 and projects 2% growth from 2025 to 2035. It says most entrants have a high school diploma and get moderate on-the-job training, and that some states and localities license welders, so check your own area. This page shows how to describe training projects with real numbers, how to list processes and positions without overstating them and how to word a certification you have or are working toward. After a year of paid work, use the entry-level welder resume. A neighboring trade page is the fresher carpenter resume.
In a first year as a welder you learn that reading the drawing correctly is half the job, that preparation decides weld quality and that the inspector's opinion matters more than yours. An entry-level welder resume is read for the type of shop or site (fabrication, pipeline, structural, repair), the processes and positions you weld, test results and inspection outcomes, your rework rate and your safety record. Supervisors want specifics: material, thickness, position, volume per shift and who checks your work. BLS reports a median pay of $53,750 for welders, cutters, solderers and brazers in May 2025 and notes that some states and localities license welders. This page shows how to describe production welding, repair work, fit-up, inspection and safety, without claiming qualifications you have not tested for. If you only have school and training work, use the fresher welder resume. After two or three years, the junior welder resume fits better. A neighboring trade is the entry-level plumber resume.
By your second or third year a welder is trusted with more positions, thicker material and jobs that go straight to inspection, and newer welders watch what you do. A junior welder resume is read for the range of processes and positions, the codes you have tested under, your first-pass inspection record, your speed on repeat work and your role with helpers or apprentices. Supervisors want evidence of reliability: production numbers, inspection results and attendance on critical jobs. BLS reports a median pay of $53,750 for welders, cutters, solderers and brazers in May 2025 and says some states and localities license welders. This page shows how to describe broader process skills, inspection results, repair and fabrication work, training others and safety leadership. If you still work mostly under close direction, use the entry-level welder resume. With lead-hand duties, see the mid-level welder resume. A related trade page is the junior plumber resume.
A mid-level welder resume, often for lead welders, certified specialists and shop or field leads, is read for the critical work you are trusted with, the range of codes and procedures, quality and rework records over many jobs, crew leadership and your safety record. Employers look for first-pass pass rates, schedule performance on jobs you led and your ability to troubleshoot hard welds. BLS reports a median pay of $53,750 for welders, cutters, solderers and brazers in May 2025 and projects 2% growth through 2035, so employers lean on proven, tested welders. This page shows how to describe lead welder duties, specialty work, procedure support, crew training and cost or schedule results. If you still weld mostly assigned work, use the junior welder resume. For supervisor or inspector paths, see the senior welder resume. A related trade page is the mid-level plumber resume.
A senior welder resume, for welding supervisors, foremen, inspectors and shop owners, is read for the size of crews and shops you run, the quality system behind your work, audit and customer results, safety record and the welders you have trained into leads. Employers and customers look for rework rates over years, inspection and audit outcomes, schedule reliability and a record of developing people. BLS reports a median pay of $53,750 for welders, cutters, solderers and brazers in May 2025 and does not give a separate figure for welding supervisors on this page, so supervisor pay is better checked against employer or union data. This page covers supervisors, foremen, welding inspectors and shop owners; engineering and management roles beyond that are only touched on. It shows how to describe crew leadership, quality systems, inspection work, safety leadership and apprentice development. For earlier steps, use the mid-level welder resume. A related senior trade page is the senior plumber resume.
Welder Resume Samples by Experience Level
A complete example, from header to education. The name, employers and numbers are fictional. Replace them with your own, and only use numbers you can back up: know which report, log or manager each one comes from, because interviewers ask.
Example · fictional details
Marcus Delgado-Okafor
Welding Program Graduate | MIG and Flux-Cored | Structural Steel
Tulsa, OK | (555) 010-2901 | marcus.delgado-okafor@email.com
Summary
Welding program graduate with 600 lab hours in MIG and flux-cored on carbon steel, passing a bend test on a 3/8-inch groove weld in the flat position. Seeking an entry-level welder role.
Experience
Welding Student, Class Project, Red Plains Technical College (example), Tulsa, OK
Aug 2025 - May 2026
- Welded 3/8-inch carbon steel groove joints in the flat position with MIG
- Passed a bend test
- Built a 6-foot utility trailer frame; joints passed visual inspection
Shop Assistant (Part-Time), Cimarron Metal Fabrication (example), Tulsa, OK
Jun 2025 - Present
- Tack weld and grind 200 brackets per shift under a lead welder
- Rework rate 3%
Education
Certificate in Welding Technology, 600 lab hours, Red Plains Technical College (example)
Graduated May 2026
Skills
MIG | Flux-cored | Stick basics | Plasma cutting | Weld symbols | Fit-up | Visual inspection | PPE
Certifications
- Passed bend test, 3/8-inch groove, flat position, May 2026 (example)
- OSHA 10-hour general industry card, 2025
- The test result names thickness and position.
- No unearned certification is claimed.
Example · fictional details
Rosalind Fairbanks-Nwosu
Welder | Structural Fabrication | Flux-Cored and MIG
Omaha, NE | (555) 010-2902 | rosalind.fairbanks-nwosu@email.com
Summary
Welder with one year in structural fabrication, averaging 14 assemblies per shift with a 2.5% rework rate. Passed the shop's 3G test plate in the third month.
Experience
Welder, Platte River Steel Fabrication (example), Omaha, NE
Jul 2025 - Present
- Weld carbon steel beams and brackets from 1/4 inch to 1 inch with flux-cored and MIG
- Completed 14 assemblies per shift with a 2.5% rework rate
- Passed the shop's 3G test plate in the third month
- Fit parts to drawings and weld symbols before welding
Welding Helper, Platte River Steel Fabrication (example), Omaha, NE
Jan 2025 - Jun 2025
- Tack welded, ground and set up parts for senior welders
Education
Certificate in Welding Technology, Heartland Technical College (example)
2024
Skills
Flux-cored | MIG | Stick | Weld symbols | Fit-up | Grinding | Rework | Machine maintenance
Certifications
- Shop 3G test plate, passed July 2025 (example)
- OSHA 10-hour general industry card, 2024
- Test plate names the position and date.
- Safety and drawings appear in the bullets.
Example · fictional details
Jerome Castellano-Ayodele
Welder | Pressure Vessel Fabrication | TIG and Stick
Houston, TX | (555) 010-2903 | jerome.castellano-ayodele@email.com
Summary
Welder with three years in pressure vessel fabrication, TIG and stick in multiple positions. 97% of 420 production joints passed first inspection.
Experience
Welder, Gulf Vessel Works (example), Houston, TX
Aug 2023 - Present
- Weld pressure vessel components in TIG and stick on carbon and stainless
- 97% of 420 production joints passed first inspection
- Handle first-article builds for new products
- Train two helpers on fit-up, tack welding and safety
Welder's Helper, Gulf Vessel Works (example), Houston, TX
Jul 2022 - Jul 2023
- Prepared joints and assisted on 60 vessel builds
Education
Certificate in Welding Technology, Gulf Coast Technical College (example)
2022
Skills
TIG | Stick | Stainless | Fit-up | Procedures | Rework | Training helpers | Hot work safety
Certifications
- TIG on stainless pipe, 6G, qualified Oct 2024 (example)
- OSHA 30-hour general industry card, 2024
- Test lists process, position and date.
- Helper training is stated.
Example · fictional details
Anselm Rutherford-Mbeki
Lead Welder | Pipe Fabrication | Stainless and Chrome-Moly
Lake Charles, LA | (555) 010-2904 | anselm.rutherford-mbeki@email.com
Summary
Lead welder with seven years in refinery pipe fabrication, leading a crew of four. 98.5% of 2,300 joints passed radiography on the first shot.
Experience
Lead Welder, Calcasieu Pipe Fabrication (example), Lake Charles, LA
Jan 2022 - Present
- Lead a crew of four on stainless and chrome-moly pipe spools
- 98.5% of 2,300 joints passed radiography on the first shot
- Train welders on new procedures
- Completed 12 projects without a lost-time injury
Pipe Welder, Calcasieu Pipe Fabrication (example), Lake Charles, LA
Aug 2018 - Dec 2021
- Welded stainless and carbon steel pipe in fixed positions
Education
Certificate in Pipe Welding, Southwest Louisiana Technical College (example)
2018
Skills
Pipe welding | TIG | Stick | Crew leadership | Procedures | Radiography coordination | Training | Safety
Certifications
- Pipe welder qualification, TIG/stick, 6G, renewed Sept 2025 (example)
- OSHA 30-hour general industry card, 2023
- Test names the position and renewal date.
Example · fictional details
Theodora Blackwood-Adeniyi
Welding Supervisor | Structural Steel Fabrication | Quality and Safety
Birmingham, AL | (555) 010-2905 | theodora.blackwood-adeniyi@email.com
Summary
Welding supervisor with fourteen years in structural steel fabrication, directing 22 welders on two shifts. Cut weld rework from 5% to 1.8% over three years.
Experience
Welding Supervisor, Magic City Steel (example), Birmingham, AL
Mar 2020 - Present
- Direct 22 welders on two shifts
- Cut weld rework from 5% to 1.8% over three years
- No lost-time injuries in the last two years
- Promoted four welders to lead roles
Lead Welder, Magic City Steel (example), Birmingham, AL
Jun 2014 - Feb 2020
- Led a crew of six on bridge and building steel
Education
Certificate in Welding Technology, Alabama Technical College (example)
2010
Skills
Supervision | Quality systems | Welder testing | Inspection reports | Scheduling | Safety leadership | Customer relations | Apprentice training
Certifications
- Welding inspector credential, 2019 (example)
- OSHA 30-hour general industry card, 2024
Welder Resume Summary Examples
Summary examples written for fresher welders:
“Welding program graduate with 600 hours of lab time in MIG and flux-cored on carbon steel from 1/8 inch to 1/2 inch, passing a bend test on a 3/8-inch groove weld in the flat position. Reads blueprints, grinds clean joints and follows PPE rules. Seeking an entry-level welder role.”
“Recent graduate who built and welded a 6-foot utility trailer frame for a class project, with all joints passing visual inspection by the instructor.”
“Welding trainee with a summer job in a fabrication shop, tack welding and grinding 200 brackets per shift under a lead welder, with a rework rate of 3%.”
- Lead with processes, material, thickness and positions.
- State any test you passed and who recorded it.
Summary examples written for entry-level welders:
“Welder with one year in structural fabrication, welding beams and brackets in carbon steel from 1/4 inch to 1 inch with flux-cored and MIG, averaging 14 completed assemblies per shift with a rework rate of 2.5%. Passed the shop's 3G test plate in the third month.”
“Welder with 14 months in agricultural equipment repair, TIG welding aluminum guards and stick welding steel frames on 60 repair jobs, with no repeat repairs in 90 days on 54 of them.”
“Pipe welder's helper turned welder with one year on industrial sites, welding 140 small-bore stainless and carbon steel joints with TIG, with 138 passing first inspection.”
- State process, material, thickness and position.
- Give a rework rate or inspection pass count with a source.
- Name the test you passed and its date.
Summary examples written for junior welders:
“Welder with three years in pressure vessel fabrication, qualified in TIG and stick on carbon and stainless in the flat, horizontal and vertical positions, with 97% of 420 production joints passing first inspection. Train two helpers and handle first-article builds.”
“Welder with three years in heavy equipment repair, welding steel castings and plate on 180 repair jobs, cutting average repair time on a loader bucket rebuild from 14 hours to 11.”
“Welder with two and a half years on structural steel erection, welding 1,100 field connections with flux-cored in the vertical and overhead positions, with a 2% rework rate.”
- State processes, positions and codes.
- Add first-pass inspection results with a source.
- Mention training helpers and safety duties.
Summary examples written for mid-level welders:
“Lead welder with seven years in pipe fabrication for refineries, welding and leading a crew of four on stainless and chrome-moly spools, with 98.5% of 2,300 joints passing radiographic inspection on the first shot.”
“Lead welder with eight years in heavy equipment manufacturing, setting up weld cells for three product lines and cutting weld rework from 6% to 2.5% over a year.”
“Field welding foreman with six years in bridge repair, leading six welders on 12 projects completed without a lost-time injury.”
- State specialty, codes and crew size.
- Source inspection and schedule results to reports.
- Show training and safety leadership.
Summary examples written for senior welders:
“Welding supervisor with fourteen years in structural steel fabrication, directing 22 welders on two shifts and cutting weld rework from 5% to 1.8% over three years, with no lost-time injuries in the last two years.”
“Welding inspector with twelve years in pipeline and plant work, inspecting over 3,000 welds a year and writing the reports used for owner acceptance.”
“Shop owner and master welder with sixteen years in custom fabrication, running a 9-person shop with on-time delivery above 95% and repeat customers for 70% of annual revenue.”
- State crew or shop size and the shift pattern.
- Source rework, safety and delivery results to records.
Skills for Welders
Technical Skills
Soft Skills
- List processes with material and position beside each.
- State test results with the date and who recorded them.
- Do not claim a code qualification you have not passed.
Technical Skills
Soft Skills
- List processes with materials and positions.
- State volume per shift and rework rate with a source.
- Name the codes your tests were under, only if you took them.
Technical Skills
Soft Skills
- Show positions, materials and codes together.
- Add inspection pass rates with sources.
- Add training of others.
Technical Skills
Soft Skills
- State specialty and codes.
- Show inspection pass rates and rework changes.
- Show crew and safety results.
Technical Skills
Soft Skills
- Lead with crew size and results.
- Show quality and safety together.
Experience Section Examples for Welders
More example experience bullets for a fresher welder. Replace the details with your own scope, tools and results:
- Welded 3/8-inch carbon steel groove joints in the flat position with MIG for a bend test
- Built a 6-foot utility trailer frame from drawings in a class project
- Tack welded and ground 200 brackets per shift as a shop assistant
- Read weld symbols on shop drawings and set up joints to match
- Wore and maintained PPE and followed hot work rules
More example experience bullets for an entry-level welder. Replace the details with your own scope, tools and results:
- Weld carbon steel beams and brackets with flux-cored and MIG from 1/4 inch to 1 inch
- Set up and fit parts to drawings and weld symbols before welding
- Grind, inspect and rework welds before inspection
- Maintain welding machines and wire feeders
- Follow lockout, hot work and PPE rules each shift
More example experience bullets for a junior welder. Replace the details with your own scope, tools and results:
- Follow welding procedures and keep records as the shop requires
- Prepare joints and rework defects found by inspectors
More example experience bullets for a mid-level welder. Replace the details with your own scope, tools and results:
- Coordinate inspection and radiography with the quality team
- Set up weld cells and train welders on new procedures
- Plan material, layout and daily targets for the crew
- Take part in the shop's safety meetings and incident reviews
More example experience bullets for a senior welder. Replace the details with your own scope, tools and results:
- Direct 22 welders on two shifts in structural steel fabrication
- Own the shop's weld quality system and review rework weekly
- Test new welders and sign off on assignments by skill
- Meet customers and third-party inspectors during audits
- Run safety meetings and review every incident
Education and Certifications for Welders
Certifications and credentials relevant to fresher welders:
- List the program, school, hours and graduation date.
- Put any passed tests ahead of general coursework.
Certifications and credentials relevant to entry-level welders:
- List test results with codes and dates.
- Add safety and trade courses by year.
Certifications and credentials relevant to junior welders:
- List tests with codes and dates.
- Add advanced training by year.
Certifications and credentials relevant to mid-level welders:
- List tests and inspector training with dates.
- Add leadership training by year.
Certifications and credentials relevant to senior welders:
- List inspector credentials with years.
- Add business or supervisory training.
Common Mistakes Welders Make
❌ Mistake
'Experienced welder' with no processes listed
✓ Fix
Name each process, material, thickness and position.
❌ Mistake
Claiming a certification you only practiced for
✓ Fix
List a certification only if you passed the test, with the date.
❌ Mistake
No safety mention
✓ Fix
Add PPE, ventilation and hot work training.
❌ Mistake
Leaving out school projects
✓ Fix
List the projects with sizes and results.
❌ Mistake
Claiming 'certified welder' with no details
✓ Fix
Name the process, position, code and test date.
❌ Mistake
Volume with no quality number
✓ Fix
Add rework rate or first-pass inspection results.
❌ Mistake
No mention of reading drawings
✓ Fix
Add fit-up and weld symbol work.
❌ Mistake
Skipping safety
✓ Fix
Add hot work, PPE and lockout.
❌ Mistake
Listing every code with no dates
✓ Fix
List each test with process, position, code and date.
❌ Mistake
No inspection results
✓ Fix
Add pass rates or rework counts.
❌ Mistake
No mention of training others
✓ Fix
Add helpers you coached.
❌ Mistake
Skipping repair stories
✓ Fix
Add one hard repair and the result.
❌ Mistake
Crew leadership with no numbers
✓ Fix
State crew size and output or safety results.
❌ Mistake
Inspection claims without a source
✓ Fix
Cite reports or logs.
❌ Mistake
Code list with no dates
✓ Fix
List each test with its date.
❌ Mistake
No mention of procedures
✓ Fix
Add procedure use and training you gave.
❌ Mistake
Supervisor title with no crew numbers
✓ Fix
State crew size and shifts.
❌ Mistake
Quality claims without records
✓ Fix
Cite dashboards or audit reports.
❌ Mistake
No safety record
✓ Fix
Add incident trends from the safety log.
❌ Mistake
No people development
✓ Fix
Add leads promoted and apprentices trained.
Quick Tips for Welders
- List processes with material and position.
- Add a passed test with its date.
- List hot work and PPE training with dates.
- Add process, material and position.
- Add a rework rate.
- Add the test date.
- Name your supervisor as a reference.
- Add first-pass inspection results.
- List tests with dates.
- Add helpers trained.
- Add a job time result.
- Add radiography or inspection pass rate.
- List tests with dates.
- Add a safety result.
- Add rework trend.
- Give welders per shift and the number of shifts you run.
- Cite the safety log for lost-time injury trends.
Pay and Outlook for Welders
Pay: BLS reports a median of $53,750 a year for welders, cutters, solderers and brazers (May 2025). Outlook: BLS projects 2% employment growth for welders, cutters, solderers and brazers from 2025 to 2035, about as fast as the average for all occupations. Source: U.S. Bureau of Labor Statistics
Starting pay is usually lower.
First-year pay is usually lower.
Pay at this stage varies with process, sector and travel.
Lead and specialty welders often earn more, depending on sector and travel.
Supervisor and inspector pay is usually higher; BLS supervisor data was not checked for this page.
Welder Resume FAQs
Do I need a license to weld?
BLS says some states and localities license welders. Check your own state or city.
Do I need a certification to get hired?
Many employers test welders on their own jobs. A passed test helps, but state it exactly and do not claim ones you did not pass.
How much training do I need?
BLS says most welders have a high school diploma and receive moderate on-the-job training. Programs and apprenticeships add skill.
Which process should I list first?
The one the posting names. Employers hire by process, material and position.
Should I list school projects?
Yes. Give the material, size and who inspected it.
How do I describe a weld test?
State the process, thickness, position, the code and the date. Name who recorded the result.
Do I need TIG for good jobs?
TIG is common in stainless, aluminum and pipe work. Show the process the job names.
Should I list overtime or travel?
Yes if the job allows it. State where you worked and how often.
Is a state license required?
BLS says some states and localities require welder licenses. Check where you work.
How do I show I read drawings?
List weld symbols, tolerances and the drawing types you work from.
What shows a welder is ready for harder positions or code work?
Show passed tests, low rework and the positions you have added.
How do I show I can do code work?
List the tests you passed with the code, process, position and date, and the inspection pass rates.
Pipe or structural: which should I show?
Show what you do now and want next. Pay and travel differ by sector.
Is a welding inspector path worth it?
It can open higher-pay roles. List any training you completed with the year.
How do I show speed without sacrificing quality?
Give production counts next to rework or first-pass rates.
Should I list travel jobs?
Yes. State the type of work and the length of assignments.
What shows I am ready to lead?
Helpers you trained and quality records on critical jobs.
How do I show lead welder work?
State crew size, job types, results and the person who confirms them.
Is inspector training worth it?
Yes if you want to move into inspection or supervision. List what you completed with the year.
Should I list specific codes?
Yes, only those you have passed tests for, with the dates.
How do I describe rework reduction?
State the baseline, the change you made, the new rate and the source.
Is travel work worth listing?
Yes. State the sectors and typical assignment length.
Supervisor, inspector or owner?
Supervisors manage crews and schedules. Inspectors check quality for owners. Owners add sales and finance. Choose by the work you want.
How does a welding supervisor show quality leadership?
State rework and audit trends and who confirms them.
Do I need an inspector credential?
It is helpful for inspection roles. List the body and year.
How do I show I train welders?
State apprentices, test results and promotions.
How do I describe safety leadership?
State meetings you run, incident review practice and the trend in the log.
Create Your Welder Resume
Choose from 26+ ATS-friendly templates, add your experience, and download a PDF.
Create Your Resume FreeExpert Career Advice
Resume Format Guide: Chronological, Functional or Hybrid
The three formats compared, which fits your situation, formats for students and how CV expectations differ by country.
Resume Tips: Write a Resume That Gets You Hired
Layout, the summary, short job stints, numbers for work that is hard to measure, a checklist before you send and how rules differ by country.
Cover Letter Guide: How to Write One That Gets Read
A four-paragraph structure, opening lines, how the letter changes with seniority and the mistakes that get it skipped.
Check Your Welder Resume with the ATS Checker
Run 50 checks on your resume and see what to fix. Free, no sign-up needed.
Related Career Paths
Explore more resume examples in Engineering and related fields