Resume guide

Structural Engineer Resume: Examples & Templates for 2026

Sample structural engineer resumes for five experience levels, from fresher to senior, with skills, bullet points and pay data from the U.S. Bureau of Labor Statistics.

Structural firms hire graduates who can set up a load path, run a hand check against a model and explain the difference. A fresher structural engineer resume is read for your senior design project, the analysis and drafting software you used (RISA, SAP2000, ETABS, Revit or similar), your steel, concrete or timber coursework, any internship on a design or inspection team and your Fundamentals of Engineering status. BLS does not publish a page for structural engineers, so this page uses its civil engineer figures, the closest occupation: a median pay of $100,840 in May 2025 and 6% projected growth from 2025 to 2035. BLS also says civil engineers need a bachelor's degree and no license to start, while a Professional Engineer license is needed to approve designs for the public. This page shows how to describe a building or bridge project with spans, loads and member sizes, and how to list software honestly. After a year of paid work, use the entry-level structural engineer resume. For the broader field, see the fresher civil engineer resume.

Structural Engineer Resume Samples by Experience Level

A complete example, from header to education. The name, employers and numbers are fictional. Replace them with your own, and only use numbers you can back up: know which report, log or manager each one comes from, because interviewers ask.

Example · fictional details

Naveen Raghunathan

Civil Engineering Graduate | Structures Focus | Steel and Concrete

Houston, TX | (555) 010-2201 | naveen.raghunathan@email.com | linkedin.com/in/naveen-raghunathan-sample

Summary

Civil engineering graduate with a structures focus. Capstone was a four-story steel office building with loads set to ASCE 7; hand and RISA beam results agreed within 5%. Seeking an entry-level structural engineer role.

Experience

Capstone Project: Four-Story Steel Office, Gulf Coast Engineering University (example), Houston, TX

Aug 2025 - May 2026

  • Determined gravity and wind loads and sized beams and columns by hand
  • Checked results in RISA; hand and software results agreed within 5%
  • Drew framing plans and details in Revit

Engineering Intern, Bayou Bridge Inspection (example), Houston, TX

Jun 2025 - Aug 2025

  • Assisted on 14 bridge inspections and wrote field notes on bearings and deck condition

Education

BS in Civil Engineering, Structures Concentration, Gulf Coast Engineering University (example)

Graduated May 2026

Skills

RISA | Revit | AutoCAD | ASCE 7 loads | Steel design | Concrete basics | Hand calculations | Field notes

Certifications

  • Fundamentals of Engineering exam, scheduled Nov 2026
  • OSHA 10-hour construction card, 2025
  • FE status is stated as scheduled.

Structural Engineer Resume Summary Examples

Summary examples written for fresher structural engineers:

“Civil engineering graduate with a structures focus whose capstone was a four-story steel-framed office building, with gravity and wind loads set to ASCE 7 and beams checked by hand and in RISA. Experienced with Revit, Excel calculation sheets and AutoCAD. Seeking an entry-level structural engineer role.”

“Graduate with a summer internship at a bridge inspection firm, assisting on 14 inspections and writing field notes on bearing and deck condition for the supervising engineer.”

“Structural engineering student on a timber design team, calculating member sizes for a 30-foot pedestrian bridge model and load testing it to the design capacity.”

  • Lead with the structure, the material and one load or span.
  • Name the load standard you used, such as ASCE 7.

Skills for Structural Engineers

Technical Skills

Steel and reinforced concrete design basicsGravity, wind and seismic load determinationRISA, SAP2000 or ETABS modelingHand calculations to check modelsRevit and AutoCAD draftingTimber and masonry design basicsFoundation and retaining wall basicsStructural drawing readingExcel calculation sheetsMaterial testingField condition notesTechnical report writing

Soft Skills

Writing assumptions downChecking your own work before submittingAsking about load paths earlyTeamwork on a capstoneAccepting a marked-up calculation
  • Pair each program with a structure you analyzed.
  • State materials: steel, concrete, timber or masonry.
  • Show hand checks beside software results.

Experience Section Examples for Structural Engineers

More example experience bullets for a fresher structural engineer. Replace the details with your own scope, tools and results:

  • Determined gravity and wind loads on a four-story steel office building for the capstone
  • Sized beams and columns by hand and checked them in RISA
  • Assisted on 14 bridge inspections as an intern and wrote field notes
  • Designed and load tested a 30-foot timber pedestrian bridge model with a student team

Education and Certifications for Structural Engineers

Certifications and credentials relevant to fresher structural engineers:

Fundamentals of Engineering exam (state your status)OSHA 10-hour construction cardRevit or AutoCAD certificate, if earnedBridge inspection training, if completedACI or AISC student chapter roles, if held
  • Put the civil or structural degree, graduation date and capstone title near the top.
  • List structures courses such as steel, concrete and foundations.

Common Mistakes Structural Engineers Make

❌ Mistake

Software names with no structure behind them

✓ Fix

Attach each program to a building or bridge and a result.

❌ Mistake

'Designed a skyscraper' for a classroom model

✓ Fix

State the real size, material and your own part.

❌ Mistake

No load standard named

✓ Fix

Name the standard, such as ASCE 7, you used.

❌ Mistake

Hand calculations missing

✓ Fix

Show that you check software results by hand.

Quick Tips for Structural Engineers

  • Add one span or load.
  • Name the material and standard.
  • Say which members or load cases in the capstone you checked.

Pay and Outlook for Structural Engineers

BLS has no separate page for structural engineers; it reports a median of $100,840 a year for civil engineers (May 2025), the closest occupation. Starting pay is usually lower.

Outlook: BLS projects 6% employment growth for civil engineers from 2025 to 2035; it does not break out structural engineers. Source: U.S. Bureau of Labor Statistics

Structural Engineer Resume FAQs

Do I need a license to start as a structural engineer?

BLS says civil engineers do not need one to start. A Professional Engineer license is needed later to approve designs for the public, and your state board sets the rules.

Do structural firms expect a master's degree?

Some structural firms prefer one, but many hire bachelor's graduates. Check postings from firms you want.

Which analysis software should structural graduates list?

List the analysis and drafting tools named in postings, such as RISA, ETABS and Revit, only if you can use them.

How do I describe a capstone building?

State the use, stories, material, loads, your part and the checked result.

Is an inspection internship useful?

Yes. Seeing real defects teaches how structures fail and shows field readiness.

Related Career Paths

Explore more resume examples in Engineering and related fields