Resume guide

Process Engineer Resume: Examples & Templates for 2026

Sample process engineer resumes for five experience levels, from fresher to senior, with skills, bullet points and pay data from the U.S. Bureau of Labor Statistics.

Process engineers keep chemical, food, pharmaceutical and materials plants making product at the right rate, quality and cost, so a graduate resume is read for evidence that you can follow a flow sheet, run a mass and energy balance and spot why a unit drifted. Hiring managers look at your capstone plant design or unit operations lab, any plant internship or co-op, the tools you used (Aspen, HYSYS, Excel, MATLAB, P&ID reading), your safety training and your Fundamentals of Engineering status. BLS has no page called process engineer, so this page uses its chemical engineer figures: a median pay of $125,040 in May 2025 and 5% projected growth from 2025 to 2035. Process engineers in other plants may be classed as industrial or mechanical engineers, which BLS reports separately. This page shows how to describe a design or lab project with flows, conversions and yields, how to list simulation tools honestly and how to word plant exposure. After a year of paid work, use the entry-level process engineer resume. A neighboring page is the fresher chemical engineer resume.

Process Engineer Resume Samples by Experience Level

A complete example, from header to education. The name, employers and numbers are fictional. Replace them with your own, and only use numbers you can back up: know which report, log or manager each one comes from, because interviewers ask.

Example · fictional details

Sergei Okonkwo-Hartley

Chemical Engineering Graduate | Process Design and Simulation

Baton Rouge, LA | (555) 010-2701 | sergei.okonkwo-hartley@email.com | linkedin.com/in/sergei-okonkwo-hartley-sample

Summary

Chemical engineering graduate whose capstone designed an ethanol separation section in Aspen Plus with the mass balance closing within 1%. Seeking an entry-level process engineer role.

Experience

Capstone Project: Ethanol Separation Design, Gulf South Engineering University (example), Baton Rouge, LA

Aug 2025 - May 2026

  • Designed a 50,000-ton-per-year separation section in Aspen Plus
  • Closed the mass balance within 1%
  • Prepared the equipment list and a cost estimate

Process Engineering Intern, Bayou Foods Processing (example), Baton Rouge, LA

Jun 2025 - Aug 2025

  • Collected 300 flow and temperature readings on a pasteurizer
  • Found a heat exchanger fouling trend

Education

BS in Chemical Engineering, Gulf South Engineering University (example)

Graduated May 2026

Skills

Aspen Plus | HYSYS | Mass balances | P&ID reading | Excel | MATLAB | Unit operations lab | Data trending

Certifications

  • Fundamentals of Engineering exam, scheduled Nov 2026
  • OSHA 10-hour general industry card, 2025
  • Simulated results are labeled as such.

Process Engineer Resume Summary Examples

Summary examples written for fresher process engineers:

“Chemical engineering graduate whose capstone designed a 50,000-ton-per-year ethanol separation section in Aspen Plus, with a mass balance closing within 1% and a cost estimate reviewed by the faculty advisor. Ran a distillation column in the unit operations lab. Experienced with HYSYS, Excel and P&ID reading. Seeking an entry-level process engineer role.”

“Graduate with a summer internship at a food plant, collecting 300 temperature and flow readings on a pasteurizer and finding a heat exchanger fouling trend.”

“Engineering student with a pilot-plant lab role, running 24 batch trials of a polymer reaction and recording conversion for each.”

  • Lead with the process, the tool and one balance, yield or flow number.
  • State how you checked the numbers.
  • Source results to an advisor, a supervisor or a notebook.

Skills for Process Engineers

Technical Skills

Mass and energy balancesAspen Plus or HYSYS simulationP&ID and process flow diagram readingUnit operations (distillation, heat exchange, reaction)Excel and MATLAB modelingData historian and trend readingProcess safety basics (hazard review awareness)Statistics for process dataLab and pilot plant operationEquipment sizing basicsCost estimating basicsTechnical report writing

Soft Skills

Asking operators how a unit really runsWriting down assumptionsFollowing safety procedures strictlyTeamwork on a capstoneReporting a bad reading at once
  • Pair each simulator with a design you checked.
  • State process type and scale.
  • Show safety training you completed.

Experience Section Examples for Process Engineers

More example experience bullets for a fresher process engineer. Replace the details with your own scope, tools and results:

  • Designed a 50,000-ton-per-year ethanol separation section in Aspen Plus for the capstone
  • Closed the plant mass balance within 1% and prepared an equipment list
  • Ran a distillation column in the unit operations lab and compared results with the model
  • Collected 300 flow and temperature readings on a pasteurizer during an internship
  • Ran 24 polymer batch trials in a pilot plant and recorded conversion

Education and Certifications for Process Engineers

Certifications and credentials relevant to fresher process engineers:

Fundamentals of Engineering exam (state your status)OSHA 10-hour general industry cardAspen Plus or HYSYS training certificate, if earnedProcess safety management course, if completedSix Sigma Yellow Belt, if completed
  • Open the education section with the degree, the date and the capstone title.
  • List unit operations, reaction engineering and process control courses.

Common Mistakes Process Engineers Make

❌ Mistake

'Optimized a process' with no number

✓ Fix

State the yield, rate or energy figure before and after.

❌ Mistake

Simulation results presented as plant results

✓ Fix

Label results as simulated or measured.

❌ Mistake

Skills with no process attached

✓ Fix

Tie each simulator to a design.

❌ Mistake

No safety training listed

✓ Fix

Add completed safety courses with years.

Quick Tips for Process Engineers

  • Add a balance closure or yield number.
  • Label simulated results.
  • State process scale.

Pay and Outlook for Process Engineers

Outlook: BLS projects 5% employment growth for chemical engineers from 2025 to 2035; process engineers are not listed separately. Source: U.S. Bureau of Labor Statistics

BLS has no separate page for process engineers; it reports a median of $125,040 a year for chemical engineers (May 2025), the closest occupation. Starting pay is usually lower.

Process Engineer Resume FAQs

Do I need a chemical engineering degree?

Many process engineers hold one, but mechanical, industrial and other degrees also appear. Check the posting.

Is a license needed to start?

BLS says chemical engineers do not need a license at entry. Check your state board only if a role requires a PE.

Which simulators matter?

Aspen Plus and HYSYS are common in chemicals. Name the ones you used on projects.

How do I describe a plant internship?

State the process, your task, the data you collected and the finding with a supervisor as source.

Do I need Six Sigma?

It helps in many plants, but a measured project beats a belt alone.

Related Career Paths

Explore more resume examples in Engineering and related fields